Product Details

Sitrans TR200

Order No: 7NG3032-…..

SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multi meter. A red/green LED shows the technician the status at a glance.


  • Compact design
  • Electrically isolated
  • Test sockets for multimeters
  • Diagnostics LED (green/red)
  • Sensor monitoring
    open circuits and short-circuits
  • Self-monitoring
  • Configuration status stored in EEPROM
  • Expanded diagnostic functions, such as slave pointer, operating hours counter, etc.
  • Special characteristic
  • Electromagnetic compatibility to EN 61326 and NE21
  • SIL2 (with order code C20), SIL 2/3 (with C23)


SITRANS TR200 transmitters can be used in all industrial sectors. Their compact design enables simple mounting on standard DIN rails on-site in protective boxes or in control cabinets. The following sensors/signal sources can be connected over their universal input module:

  • Resistance thermometers (2, 3 or 4-wire system)
  • Thermocouples
  • Resistance-based sensors and DC voltage sources

The output signal is a direct current from 4 to 20 mA in accordance with the sensor characteristic.

Transmitters of the “intrinsically safe” type of protection can be installed within potentially explosive atmospheres. The devices comply with the Directive 94/9/EC (ATEX).